Used Strapping Machine

2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping

2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping
2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping
2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping
2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping
2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping
2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping
2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping
2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping
2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping
2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping
2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping
2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping

2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping    2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping
This unit is a 2009 Sonix-TRC and it is in fantastic condition. When I obtain used Moscas, I obviously look at the cycle counter. This unit has only a tick over 852,000 cycles! That's an insanely low cycle count given an easy total lifespan of 8-10 million cycles and I have in my possession a ROMP-2 that has over 15 million cycles. This unit has about than 10% of it's potential lifespan used thus far. Another excellent thing is the fact that the previous owner was using this as an off-line bundler for spot work. The conveyor drive belt was missing and the rollers look as though they have never been run.

They were letting the rollers roll free so they could push the bundles in and out of the arch. This means I did not have to rebuild the conveyor system yessss! And the bearings and rollers are in like-new condition. There is no wear on the rollers where the belt drives them. There are also poly sleeves installed on the rollers and that is a nice option since they are very hard to install.

The unit's finish looked typical of a machine that has spent the last 10 years in a corrugated plant. The paint was dull and lightly scratched so I gave it a coat of my hardened Mosca blue urethane with hardened epoxy over any bare metal. Those with a sharp eye will notice that the conveyor drive belt is missing and that is because Mosca back-ordered me until next week. Once it arrives, I will install it and then do a Youtube video showing the machine in operation and will provide info on the video here so you can view it. Most big Moscas I get are set for 5mm strapping but this unit can be used as a belly-bander for Gaylord bins.

That is the reason it is set for 12mm and I think that bundles large enough to be used in a 86 wide strapper can probably use wider strap. The 5mm would not be strong enough and might cut into the finished product.

The machine is set for Mosca 1260B (black) but it could also use different colors or 1250 strap that is a bit thinner and gives more footage per roll of strap. The price includes palletizing and I will load it on the truck carrier of your choice. Also included is a factory manual in PDF form, a door key, an electrical print and the conveyor micro-controller manual. Just a guarantee that the machine works out of the box (crate). If you would like to see a video of this exact machine operating, highlight & copy the following line and paste it into the Youtube search bar. My video will come right up. Please feel free to text me if you have any additional questions. The item "2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping" is in sale since Wednesday, November 6, 2019. This item is in the category "Business & Industrial\Material Handling\Packing & Shipping\Filling & Sealing Machines\Strapping Machines". The seller is "davebydetroit" and is located in Waterford, Michigan.

This item can't be shipped, the buyer must pick up the item.

  • Model: Sonix-TRC
  • Country/Region of Manufacture: Germany
  • Brand: Mosca


2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping    2009 Mosca Sonix-TRC with 86 x 21.5 arch and compression set for 12mm strapping